Jeep Wrangler Truck Conversion
This conversion started as a rust free southern 1997 Wrangler.
I Swapped in 6.0L LQ9 out of an escalade. (new seals, gaskets and fully inspected while it was out) This thing has no trouble turning 37’s…4L60e Transmission with a Lokar shifter.
It has JK Rubicon Dana 44 axles which widen the stance to 65” plus tires. It is geared to 5.13. The axles are trussed front and rear.
The frame was stretched 24 inches between the axles (cut then used ¼ slugs that were plug welded then 3\16 fish plated on the outside). Frame was then internally coated with the Eastwood internal frame coating. Frame was also extended 17 inches behind the rear axle to create the rear winch mount. I Used a 3/16 steel closeout welded to the tub to finish the cab.
The bed is a Ute aluminum tray with fold down sides, front and rear headache rack. Weighs roughly 250 lbs including the mounts.
This truck took me 2 years to build. I covered every detail and didn’t take any shortcuts. It’s an attention getter for sure. If you don’t mind the rumble of a hotrod or people taking pictures, staring and talking to you at red lights, gas stations, restaurants etc. this may be your kind of ride (not even kidding). If you have questions, Please ask.
This truck is set on GO! Sounds awesome, pulls super strong and drives out great. It’s super fun to drive. I have a wife and 2 kids that love to ride but this is only a 2 seater which is the only reason I am considering selling.
6.0 LQ9
4L60E AUTOMATIC transmission
Lokar shifter
3/16 steel cab closeout welded to the tub
Ute Aluminum tray with fold down sides and front/rear headache racks
Tub has Line-X on the interior floors, firewall and undercarriage
Floors are insulated with lizard skin
Bed Rug carpet
Tuffy Security console
Pyle double din radio with Navigation, Bluetooth etc…Twice the size of stock in a modified dash
Dakota digital gauges
Dash camera
Reverse camera
Custom switch panels
Led Headlights
LED offroad lights, Bed Lights, rear lights.
JKU rubicon dana 44 axles
5.13 gears
Metal Cloak Overline 6” fenders
Metal cloak frame built bumper with winch guard
Front winch – Warn Zeon 10K winch with synthetic line Front winch (not included add 1000$)
Rear winch- Badlands 12K winch with remote wireless controls
Gr8tops half cab top
TNT Customs Axle trusses- front and rear
E-Lockers Front and rear
5.13 Gears
Metal cloak 3.5 “ long travel suspension kit with adjustable control arms and dual rate springs
Custom braided stainless brake lines made to fit front and rear
Braided stainless fuel lines
Braided stainless power steering lines
OME shocks
TNT Trackbar Kit for TJ
AEV pintler wheels
37 12.50 17 BFG KM2 with 90% tread
Poison Spyder sport cage
Bartact seat covers
AEV heat reduction hood (took forever to find one…super hard to find)
Drake hood latches
Oversize Kryoflow aluminum radiator with electric fan (novak)
Novak transfer case adapter
Novak transfer case cable shifter
3 inch stainless exhaust with a flowmaster chambered muffler
Custom driveshafts from Tatton driveshafts
Currently it needs an a/c clutch…the one on it is bad. That’s all that I’m aware of at this time. It’s a custom, highly modified vehicle. It is sold as is, so please ask questions before buying or making an offer.
Cena: Aukce
Více informací: Klikněte zde pro více informací a zobrazení eBay aukce (Affiliate odkaz)
Cleveland, Tennessee, United States
